AC WORKS® Library — 10-50 plug

Download: Welder Product Sheet

Posted by Stephanie Junek on

AC WORKS™ Welder Product Sheet Download Here.

Read more →

AC WORKS™ Wisdom: Welder Connections

Posted by Christopher Hahn on

SHOP WELDER SOLUTIONS Being a welder, contractor or a construction worker can put you in a variety of different spaces. To get the job done, you must always be connected. Having basic knowledge of the tools you’re using will help you stay connected. Most welders have a 3-prong plug that is rated for 50 Amp use. The most common is the NEMA 6-50P male plug, but another option is the NEMA 10-50P male plug. You can use high-power outlets for your welder at home. The common high-power outlets are for your electric cooking range and your clothes dryer. These are...

Read more →

User Manual: 20 or 30 Ampere Locking Plugs and Connectors

Posted by Stephanie Junek on

1. CABLE: Provide a cable of applicable ampacity, service and temperature rating suitable for the conditions of use and location. The plugs and connectors are designed for use with 3, 4 or 5 conductor cables with a diameter from .375’’ to 1.56” (12/3 SJ through 8/5 S). 2. CORD CLAMP PREP: Gray colored cord clamp inserts preinstalled for use with .550” to .875” cable diameter. If you need other sizes, please contact us. 3. CABLE PREP: Remove out jacket 2” and strip each individual conductor 5/8” as shown in Figure 1 Below. Make sure the wire is clean and bright...

Read more →